Dyson Vacuum Fuse Location – How to Find It [Complete Guide]

Image showing Dyson fuse, and showing text "Dyson vacuum fuse location."

Fuses are a common solution nowadays, being a part of almost every electronic device. They work by protecting various parts of the device allowing for more reliable operation. Dyson vacuum cleaners couldn’t be different in this aspect – but where exactly is the Dyson vacuum fuse location?

In this article, we will answer this and more questions related to your Dyson fuses. Learn why they exist, how to find them, and what is the most common cause for looking for them.

Quick Answer:

To locate the fuse in your Dyson vacuum, first, unplug the device from the outlet. Place your vacuum in the upright position and disconnect the wand from the rest of the machine. Use a Torx screwdriver to remove two bolts attached to the wand compartment.

This will allow you to find thrust fasteners that can also be unscrewed and carefully removed from the control board of your vacuum cleaner. This will allow you to see two buttons, where one is for power, and the other one is for your vacuum’s brushes. Pressing the power button downwards will discharge it, and you will be able to finally see the fuse location.

Do Dyson Vacuums Come with a Fuse?

Dyson vacuums come with a fuse, in fact, there are two fuses that are responsible for different things. The first one is made to protect your machine from overheating while the other one protects it from faults. Without them, your vacuum cleaner would be potent to electrical damage, including short circuits or power surges.

The thermal fuse protects your machine’s motor from overheating by shutting it down. This means that in case your vacuum cleaner gets too hot due to blockage, clogs, or any other reason, it will instantly power it down to prevent the motor from taking permanent damage.

How to find your Dyson vacuum’s Fuse?

Finding your Dyson vacuum’s fuse is relatively simple, you only need one tool, and the whole process shouldn’t take you more than 20 minutes, even when doing this for the first time. Below you can find step-by-step instructions that should completely suffice for you.

What do you need?

To remove all the elements blocking your way to the fuse, you will require only one Torx screwdriver. We also recommend having a clean cloth handy to wipe down any dirt and debris that you can find on the way to the fuse.

How to locate a fuse? – Step-by-step Guide

Here are simple steps that should help you locate the fuse of your Dyson vacuum:

  1. Disconnect your Dyson vacuum from the power outlet.

  2. Place your vacuum in the upright position.

  3. Disconnect the wand from the rest of the machine.

  4. Use a Torx screwdriver to remove two bolts that are attached to the wand compartment.

  5. After the removal of two bolts, you can find four thrust fasteners. Unscrew them and detach the control board.

  6. Press the power button downward to discharge it, and after that, you will finally be able to see the fuses.

Don’t forget to wipe off any dirt and grime on your way to the fuses that may cause blockage and clogging. This is highly recommended to prevent problems with overheating in the future. The clean cloth you use to remove the dirt should be 100% dry.

What is the vacuum fuse responsible for?

Fuse is present in almost every electrical device nowadays to make them withstand power fluctuations. This means that short circuits and power surges won’t be something that you need to worry about when using a particular device.

Vacuum cleaners have another fuse on top of that to prevent them from overheating. High temperature has the potential to damage various elements inside the vacuum cleaner including the motor, belt, and other smaller parts. The fuse works by shutting down the vacuum cleaner completely when the temperature rises too high.

Problems related to the Dyson fuse

The Dyson vacuum suddenly stopped working

Your Dyson vacuum can suddenly shut down during a standard cleaning session. This may leave you wondering what is the root cause of this problem. As we mentioned earlier, all Dyson vacuum cleaners come equipped with a fuse that works by shutting down the vacuum cleaner when the temperature is too high.

The conclusion of this is that there’s a high probability your vacuum is overheating. This causes the fuse to shut down the motor, leaving you not being able to finish the cleaning. Learn why your vacuum cleaner is overheating by looking at the guide below.

Dyson vacuum blowing fuse

The same thing we talked about above can lead to your Dyson vacuum blowing fuse or burning power cables. That means you shouldn’t, under any circumstances, leave your vacuum cleaner to overheat. Prevention through regular maintenance and cleaning is your safest bet.

How to fix Dyson overheating issues?

Dyson vacuum cleaner that’s overheating can result in permanent damage to various elements, leading to costly repairs or replacements. This is why it’s crucial to completely prevent vacuum overheating through regular maintenance and cleaning. 

Below you can find the most common reasons why your vacuum cleaner started overheating, when trying to fix this issue start from the things described below.

To learn different reasons why your Dyson is overheating, we highly recommend to read this article.

Full canister

Blockage and clogging are the most common causes for your vacuum cleaner to overheat. This may be related to a full canister that hasn’t been emptied in a long time or other elements that got clogged with dirt, debris, or pet hair. Be sure to check for all parts of the vacuum that pass the airflow to the canister.

Dusty filters

Dusty filters are probably the second most common problem related to vacuum overheating. To fix this issue wipe down the filters with a dry clean cloth, or if that’s not enough, wash them under cold water. Be sure to let them fully dry before you put them in your vacuum cleaner again.

That being said, be sure to look for instructions from the manufacturer to see the viable method for your vacuum model. Some filters may not be suitable to wash under water.

You may also want to consider replacing your vacuum filters completely, especially if you see signs of wear and tear.

A side note: If your vacuum struggles with more problems such as Dyson not rolling smoothly, or pulsing on and off, be sure to also check out our other articles.


In conclusion, to find the location of the Dyson vacuum fuse, start by unplugging your device from the power outlet. After that’s done, place your vacuum in the upright position and disconnect the wand from the rest of the cleaning machine.

Use a Torx screwdriver to remove two bolts that appear on the wand compartment, and unscrew the thrust fasteners that are underneath. After that, you will be able to see two buttons, one of which is for power, and the other one is for your vacuum’s brushes. Press the power button downwards to discharge it, and locate the fuse.

If our troubleshooting and solutions still didn’t help, here’s a comparison article covering two most popular Dyson vacuum cleaners, that can help you find a replacement – dyson v6 vs dyson v7.